| Scope Of Adaptation | Buses, Trucks |
|---|---|
| Compatible Models | Cummins B/L/X Series |
| Packaging Identification | Laser Marking |
| Lubrication System | Lithium - Based Grease Filling |
| Sealing Form | Radial Contact Seal |
| Natural Frequency | 18±2Hz |
|---|---|
| Fuel Compatibility | CH-CI-CK |
| Pressure | 9MPa |
| Scope Of Adaptation | Buses, Trucks |
| Packaging Identification | Laser Marking |
| Natural Frequency | 18±2Hz |
|---|---|
| Materials | High-strength Cast Steel Casing |
| Damping Ratio | 0.18-0.22 |
| Lubrication System | Lithium - Based Grease Filling |
| Packaging Identification | Laser Marking |
| Sealing Form | Radial Contact Seal |
|---|---|
| Packaging Identification | Laser Marking |
| Lifespan | Long-term Use |
| Materials | High-strength Cast Steel Casing |
| Scope Of Adaptation | Buses, Trucks |
| Deep Matching | Yuchai, Weichai Series |
|---|---|
| Sealing Form | Radial Contact Seal |
| Damping Ratio | 0.18-0.22 |
| Lifespan | Long-term Use |
| Pressure | 9MPa |
| Fail-safe bescherming | De breuksterkte van de lagerstoel is ≥ 800mpa |
|---|---|
| Aanpassingsspecificaties | Shanghai Diesel R -serie |
| Materiële samenstelling | Hoofdlichaam gietijzer |
| Vermoeidheid met betrekking tot het leven | ≥3 × 10⁷ revoluties |
| Onderhoudscyclus | 150.000 kilometer |
| Oppervlaktebespuiting | Epoxyhars anti-corrosiecoating |
|---|---|
| Structuur | Meerdere lagen dempingsstructuur |
| Ultieme draagkracht | ≥ 1,5 maal de nominale belasting |
| Aanpassen | YC6J/YC6L/YC6MK |
| Vibratietest op de bank | 500, 000 lussen |
| Filtermateriaal | Een dubbellagig composietfiltermateriaal van glasvezel + hars geïmpregneerde cellulose |
|---|---|
| Aanpassing aan het milieu | - Van de koude zone van - 40°C tot de hoge temperatuur zone van 55°C |
| Milieuvriendelijke materialen | Filtermaterialen kunnen voor 100% worden gerecycled. |
| Deep matching | Diepe matching |
| De levensduur bereikt | 20,000 kilometer |
| The shell is made of | ADC12 aluminum alloy |
|---|---|
| Dynamic response time | ≤0.3 seconds |
| wheel body | ductile iron |
| Gas source pressure | 0.6-0.8MPa |
| Salt spray test reaches | 1000 hours |
| Corrosion resistant | Salt spray test for 480 hours |
|---|---|
| Total length | 350mm~600mm |
| Thermal insulation coefficient of plastic materials | ≤0.15W/(m・K |
| Temperature resistance range | -40℃~150℃ |
| Vibration resistance performance | 10-2000Hz |